Related Products

Hydra Evo Autoclave, 15 litres

03993
Temporarily unavailable
7-12 days
2.852,00€
€2,566.80
Tax included
2.070,00 € Tax excluded
Qty:
7-12

6 installments
6 interest-free installments

Possibility to buy with up to 6 interest-free installments by credit card

Blank page

Hydra EVO plus autoclave 15 litres with thermal printer 

Automatic steam autoclave for the sterilization of unwrapped instruments. Closure system with an operator safety pivot. Thermodynamic system for the ejecting of the "cool" air locks.

Two sterilization cycles: 121°C and 134°C
Automatic phases of pre-heating, sterilization cycle and drying.
Built in printer for the registration of cycles carried out.
Pre-set, non-modificable cycles

All cycles are pre-set at the factory and guarantee perfect and safe sterilization of treated materials. There is no way the operator can manipulate or alter the cycles, and this safeguards against risks deriving from human error.

Pre-set temperatures
The temperatures set for our autoclave cycles are 134°C and 121°C. The 134°C cycles are normally used for the sterilization of solid and ferrous materials. 121°C cycles are normally used for sterilization of thermoplastic and delicate materials.

Water tank
Hydra EVO only has one water tank. This tank must be filled with distilled or demineralized water and acts as a container for collecting the used water which is then re-utilized for new cycles.

Safety on the door
Each door is equipped with 2 locks:
a mechanical one which does not open when pressure is exerted
a dynamic one, that operates thanks to a special form of door seal

Safety devices installed

Certified safety valve

PED on sterilization chambers

Controls on the Autoclave

Control of the water that enters into the chamber
Safety Thermostat

Time Control
The sterilization chamber is completely stainless steel AISI 304 and it is heated by a band shaped heating element which grants uniformity of the heat. Supplied with four aluminium trays and one key for their extraction. User manual available in English, French, Italian, Spanish.

• 93/42/EEC Medical device
• 73/23/EEC Low tension
• 93/336/EEC Electromagnetic Compatibility 

 Technical Specifications 

Stainless steel chamber: o 24.5 x 40 cm (Plus)
External size: 44 x 38 x 50 cm (W x H x D)
Net weight: 35 kg
2 sterilization cycles: 121°C and 134°C
Operating Voltage: 230V ±10% - 50/60Hz
Power consumption: 1700 W
Class N

Made in Italy - Warranty: 1 year

Cycle: Not wrapped 121° C

Materials:
Fragile solids
Rubber solids
Glass

Turbines (if indicated by producer)
Sterilization time: 20 min
Drying time: 5 min
Max load: 2.8 kg (700 g load in any tray)
Working pressure: 1.2 - 1.3 bars
Cycle: Not wrapped 134° C

Materials:
Stainless metal solids 
Turbines (if indicated by producer)
Sterilization time: 10 min
Drying time: 5 min
Max load: 2.8 kg (700 g load in any tray)
Working pressure: 2.1 - 2.2 bar 

Αναισθησιολόγοι
Παιδίατροι
Εταιρειες Ιατρικών
Πνευμονολόγοι
Ορθοπεδικοί
Αιματολόγοι
Γυναικολόγοι
Ακτινολόγοι
Γαστρεντερολόγοι
Χειρουργοί
Νευρολόγοι
Πλαστικοί
Μικροβιολόγοι
Νεφρολόγοι
Καρδιολόγοι
Κτηνίατροι
Ουρολόγοι
ΩΡΛ
Αισθητικοί
Γενικοί Ιατροί - Παθολόγοι
Φυσίατροι
Δερματολόγοι
Οδοντίατροι
Return
Product added to wishlist

The site uses cookies for the best user experience.

To ensure the proper functioning of the site, we sometimes place small data files on your computer, called cookies.
Most large sites do the same.